What does error 1297 mean? Error 1297: A privilege that the service requires to function properly does not exist in the service account configuration. You may use the Services Microsoft Management Console (MMC) snap-in (services.
Error 1297: The permission required for the actual service to work properly is missing from the service wallet configuration.
When a particular DHCP service is stopped (or not started), the main symptoms/problems you are experiencing on your device are as follows: 1. You get the error “Windows may not be able to start the DHCP server on local computer.: denied” in Event Viewer. 3. Otherwise, your network connection (WLAN) is not working.
This article explains how to fix diseases appearing on the DHCP server. The DHCP service server is up and running. To test this call, run the net start command and find the DHCP server. There is an authorized DHCP server. Windows sees DHCP server authorization in the domain join scenario.
The DHCP error is contacting a server on your network that provides an IP address to devices that cannot assign an IP address to your hard drive. The DHCP setting may interfere with the Internet connection. It can also appear in many types of forms.
What does error 1297 mean in Services.msc?
When I try to think of Windows Installer in Services.msc it gives me this error Error 1297. The privilege required for the service to work properly is missing from the service installation account. How can I fix this?
Can a DHCP server back up another DHCP server?
The Backup-DhcpServer cmdlet backs up the Dynamic Host Configuration Protocol (DHCP) service of the client’s DHCP server to a location.
How does DHCP scope creation differ in Windows Server 2012 and Windows Server 2012 R2 compared to prior Windows Server versions?
When you create r2 in Windows Server 2012, the scope is created separately before you can add the DHCP server role. In Windows Server 2012 R2, create a domain when you implement the DHCP Server role. In Windows Server 2012 R2, the probability is created separately and added after this DHCP server role.
How does the DHCP server respond to a DHCP offer?
When the client on the right sends a DHCP DISCOVER (broadcast), its router redirects it to a DHCP server with the full gateway IP address as the source and the DHCP server’s IP address as the scope (unicast). The DHCP server then responds with a DHCP OFFER specifying its IP address as the source and correcting the IP address fa0/1 as the destination (unicast).
Why is my DHCP client not receiving packets from the DHCP server?
Due to its own VLAN configuration, including trunk port SW B, the DHCP client does not initially receive any packets from the DHCP server. This is very easy to solve if you “manage” this DHCP client host. Assuming eth0 is the network program used by the DHCP client host in such an argument, it’s very simple:
How is DHCP discover received from the DHCP server?
Such a DHCP DISCOVER (as seen from the DHCP client side) is correctly received by the DHCP server. Considering the following contingency: Misconfiguration/misconfiguration of one or two trunk ports means: VLAN X traffic sent by SW B when SW A crosses over (or DHCP client to Is-DHCP server) wants to send CLOSED.
What causes DHCP server to receive duplicate DHCP messages?
This issue occurs because duplicate DHCP relay agents are the root of the DHCP server, so duplicate DHCP messages are always generated for every client that connects to the network. For both DHCP requests, a failover-enabled DHCP server sends additional ACK messages to clients that have exceptional lease times.

Ermias is a tech writer with a passion for helping people solve Windows problems. He loves to write and share his knowledge with others in the hope that they can benefit from it. He’s been writing about technology and software since he was in college, and has been an avid Microsoft fan ever since he first used Windows 95.