According to your description, I understand that your Windows 2008 server keep receiving Event ID: 5774. These events are typically logged with other events that may that may give clues to the problem. In general, these events indicates that the machine is unable to register its records with the DNS server it’s configured to register with.
This causes the NETLOGON error event 5774 to be logged with status code 9502 TB (dns_error_bad_packet) or prevents the cluster from bringing resources online for scenario 2.
I know from your description that your Windows 2008 server is receiving event id: 5774. These events are usually logged along with additional events that may indicate a problem. In Commander, these events indicate that the computer system cannot register its elements with the DNS server it should be registered with.
This area code error is usually fairly easy to fix because there isn’t much of it. 1. The Netlogon service does not start when checking the application server or domain. a. Check each step of the authentication chain and start the Netlogon service. 2. Sysvol and/or Netlogon cannot be shared on a domain controller a.
I keep getting error 5774 on our Small Office Server ’08 RC1? Here’s what the error checks for: For computer users, and in order to know this domain controller, this entry must actually try to be registered in DNS. Determine specifically what may have caused this error to resolve the issue and initiate the domain name controller to register DNS records.
How to resolve netlogon event ID error 5774?
Here are the error messages: In order for computers and drivers to find this domain controller, this valuable entry must be registered in DNS. Determine what might be causing this single error, fix the problem, and then start automatic DNS record registration from the domain controller. To analyze what could be causing this error, run DCDiag.exe.
Why is event 5774 recorded as failed DNS update?
The entry for event 5774 looks like this: The domain operator location code suggests that DNS record registration failed. As such, Domion Controller Locator typically does not deregister DNS records when downgrading is required.
What is the difference between Windows Server 2008 2008 ST and 2008 R2?
Server 2008 uses the same kernel as Vista and is available in 32-bit and 64-bit flavors. Server 2008 R2 has a true Windows 7 x64 kernel and is therefore only available for 64-bit codecs. UNIVERSE without WINDOWS CHAOS!
What is the difference between Windows Server 2008 and 2008 SP and 2008 R2?
Server with 2008 SP2 costs the same partitions as Vista with SP2. It is definitely available in both 32-bit and 64-bit versions. Server 2008 R2 will have the same bitness as Windows X64 7. It is only available in 64-bit editions.
What is the difference between Window Server 2008 2008 SP and 2008 R2?
Server 2008 SP2 is similar to Bits Vista SP2. It is available in 33 64 and 64 bit versions. The R2 server has the same bits as Windows 7 x64. This results in only minimal 64-bit versions.
Why does Windows 2008 / 2008 R2 / Windows 7 fail to boot?
Windows 2008/2007 R2/Windows 7 boots after a successful reboot from Veritas System Recovery (SSR) or possibly Backup Exec System Recovery (BESR) to a blank screen or any boot failure. Error: Failed to start Windows. Windows failed to start. The reason may be a current software change.

Ermias is a tech writer with a passion for helping people solve Windows problems. He loves to write and share his knowledge with others in the hope that they can benefit from it. He’s been writing about technology and software since he was in college, and has been an avid Microsoft fan ever since he first used Windows 95.