Press and hold Shift key. While holding Shift key, click the Off button>Restart. Note: Hold the Shift key, after clicking Restart. You will see the same image below:
Click, Troubleshoot.
Click, Advance options.
Click, Command Prompt.
Type Bootrec/fixmbr, press Enter.
Type bcedit /export c:\bcdbackup, hit Enter.
Type attrib c:boot\bcd -h -r -s, and Enter.
Type ren c:\\boot\bcd bcd.old, and Enter again.
Right-click the drive with the BCD boot error causing Windows to fail loading the BCD file and select Repair MBR. 5. Select the type of MBR for your unique Windows operating system.
A recent part or software change could be the root cause. The common denominator is that the recovery screen points to the \boot\bcd database. The error can be your consequence of (among other things): Unexpected shutdown. Blue screen or alternate errors that require a reboot. Data corruption. Hard disk failure. BCD file, also known as misconfiguration corruption.
bcdboot utility file created by Aomei Tech for use on the Microsoft® Windows® operating system; First, on 07/22/2009, a special version of bcdboot.exe for Windows 2 was introduced in Windows 7.
What does Ren C \\ boot BCD bcd.old do?
It is used to test the commands that a computer started with a brick wall can use. The command: ren bcd c:\\boot\\bcd.old means that the system cannot find the specified files.
How to troubleshoot system cannot find BCD bcd.old?
Command: ren c:\boot\bcd bcd.old is displayed normally, the system cannot find the specified files. How to fix it? 1) Why can’t the specified file be found? displayed: The process was successful. displayed: The system cannot specify all search paths (Why can’t it find the search path?)
Can a BCD adder add more than one BCD digit?
The BCD adder adds two BCD numbers together and outputs as a BCD digit. A or bcd The BCD digit cannot be greater than 9. The two BCD digits must be added using the ideas of binary addition. If the sum can be less than or equal to and 9 is equal to 0, no adjustment is required.
When to use long BCD or short BCD?
Long use when you have more than 9 digits BCD recommendations. This assumes that each byte will most likely be stored as little-endian BCD, with our own MSB in the current MSB of the byte. Is this exactly what the BCD Wikipedia page describes as the most common implementation?

Ermias is a tech writer with a passion for helping people solve Windows problems. He loves to write and share his knowledge with others in the hope that they can benefit from it. He’s been writing about technology and software since he was in college, and has been an avid Microsoft fan ever since he first used Windows 95.