Enter the BIOS on a Windows 11 PC by pressing a key — usually F2 or Delete — while your PC’s splash screen is visible. You can also restart into the BIOS by going to the Recovery page in the Settings App and clicking “Restart Now” next to “Advanced Startup.”
Enter the BIOS on a Windows 11 PC by pressing a key — usually F2 or Delete — while your PC’s splash screen is visible. You can also restart into the BIOS by going to the Recovery page in the Settings App and clicking “Restart Now” next to “Advanced Startup.”
How to reboot computer into BIOS?
To boot into UEFI or BIOS mode in UEFI mode or Legacy BIOS mode: Open the firmware menu. Start the PC and press the manufacturer button to open the menu.
UEFI and BIOS mode in WinPE. Query computer to determine what mode the system is in.
Make sure you switch to the correct mode every time.
How do you enable BIOS?
To enable this quality, try these instructions based on Red Hat instructions: Restart your computer.
Whenever the computer boots up with a black screen, press the Del, Esc, F1, F2, or F4 key.
In all BIOS settings, look for items related to the processor.
enable virtualization; General tuning can be called VT-x, AMD-V or svm, Vanderpool.
Save changes and reboot.
Other products and solutions
How to get into BIOS with a wireless keyboard?
You can now use the Bluetooth function keys to press the piano: during POST
In the power button menu
In BIOS settings
How to start in BIOS mode?
#2 Open the BIOS settings of Windows 11. Open “Settings” directly in the settings of Windows 11.
Go to System Restore > > Restart Now.
Be careful – save your unsaved work and click Reload Now.
Then go to Troubleshoot > Advanced Options > UEFI Firmware Settings and click Restart.
Here, go to “About UEFI Firmware Settings” and select “Reboot”. 5. You can now access the BIOS or UEFI settings page on your Windows 9 PC. Command Prompt also allows your whole family to access the BIOS settings page which is in 11 windows. Just place an order and you will be taken to the advanced screen, options and from there you can save your windows bios. Here’s how it works. one.
To access your BIOS or reboot from a cold bus, once you can start your computer, you must press a special key to access your BIOS, which can remain F2, F4, F8, or FROM. Usually the PC will show exactly what it is.
Launch parameters. Go to System > Recovery. From there, click “Restart now” in the advanced boot response. In the entire advanced boot menu, click Troubleshoot > Advanced Options > UEFI Firmware Settings. Finally, click “Restart” and your computer will enter the UEFI/BIOS settings in the next moment.

Ermias is a tech writer with a passion for helping people solve Windows problems. He loves to write and share his knowledge with others in the hope that they can benefit from it. He’s been writing about technology and software since he was in college, and has been an avid Microsoft fan ever since he first used Windows 95.