Solution 1: Remove any unnecessary hard drives.
Solution 2: Try plugging the installation media into a different USB port.
Solution 3: Make sure the target drive is at the top of the computer’s boot order.
Solution 4: Format the installation location.
It can be caused if you have too many unnecessary hard drives connected to your system.
This error can be triggered if there is not enough space on the disk partition you are trying to install Windows on.
In case your disk partition contains errors or damage, it could cause this error.
A damaged hard drive can be another reason for this error.
The info here is what happened: 0x80300024″, or something like “Windows was sure it wouldn’t install”, the location is not part of the boot device.
If you are installing Windows OS from a flash drive, we can use this solution to fix error 80300024. You may have connected the flash drive to the air vent incorrectly. Therefore, we suggest, according to experts, disable the flash drive, in this case, try connecting it to other networks.
Shut down the machine and install a computer-themed SSD. 2. Then we eagerly connect the USB to our PC. 3. To start the workstation, immediately press and hold the BIOS kernel (F2, Del, F10 and/or possibly F12 depending on the manufacturer) until the BIOS screen appears. .
Finally, to get rid of the NVME error code 0x80300024, we recommend that you make sure that you have enough space on your drive. If you can’t format your vacation destination (due to lack of portable storage or other reasons), this is the least you can do. This ensures that there is at least enough space for the independent installation of the new operating system.
How do I fix error 0x80300024 when installing Windows?
How to fix error 0x when installing Windows Solution 1: Remove any unnecessarily resource-hungry disks. Solution 2 – Try connecting the installation media to a different USB port Solution 3 – Make sure the actual target drive is at the top in the computer’s boot order. Solution 4 – Format the installation location Solution 5 – Replace a really strong drive
Why do I get error 0x80300024 when installing Windows?
You may see error code 0X80300024 because the hard drive you are trying to install Windows on is not at the top of your computer’s boot order. At startup, each computer system has an order of sources from which this method tries to load the operating system, and this order is designed by the BIOS of the average computer.
How do I fix error 0x80300024 when reinstalling Windows 10?
Solution 1 – Disconnect unnecessary hard drives 2: Solution Check if you are using the correct USB port. Solution 3 – Set up the hard drive during the main boot drive For a solution, see Freeing up space. Solution 5: Replacement hard drive
How do I fix Windows installation error 0x80300024?
How to Fix Error 0x80300024 in Windows
How to troubleshoot the error 0x80300024 on Windows 10?
In this case, it is recommended to format the hard drive to get rid of error 0x80300024. Here are all the steps: Connect/insert the installation media and restart your computer.
Ermias is a tech writer with a passion for helping people solve Windows problems. He loves to write and share his knowledge with others in the hope that they can benefit from it. He’s been writing about technology and software since he was in college, and has been an avid Microsoft fan ever since he first used Windows 95.